Mapping haze-komi on rice koji grains using β-glucuronidase expressing Aspergillus oryzae and mass spectrometry imaging

1. Download : Download high-res image (148KB)
2. Download : Download full-size image

     

无烟煤制工业燃气项目原料煤价与经济性的关系分析

针对我国建材行业传统使用的常压固定床煤气发生炉及化肥行业固定床间歇气化炉面临淘汰,无烟煤市场萎缩的情况,提出以晋城无烟煤为原料,利用赛鼎碎煤加压气化技术,生产适合建材行业大规模使用的工业燃气。以无烟煤为原料的河北沙河年产26亿m^3工业清洁燃气项目为基础,对无烟煤与天然气价格、项目经济性的关系进行了分析,结果表明,以晋城无烟块煤运到河北沙河的到厂价935元/t计算,盈亏平衡天然气价约2.26元/m^3;以沙河工业天然气到户售价2.5元/m^3计算,盈亏平衡到厂煤价约1 077元/t,项目经济性较好。     

超临界二氧化碳干气密封相态分布规律与密封性能研究

以超临界二氧化碳干气密封为研究对象，分别以维里方程、Lucas方程描述二氧化碳真实气体效应、黏度的变化，在考虑阻塞流效应的同时，采用有限差分法对考虑离心惯性力效应的Reynolds方程与能量控制方程进行耦合求解，分析讨论了工况参数与槽形结构参数对其相态分布规律与密封性能的影响。研究表明：S-CO₂从密封端面进口至出口的流动过程中，如果工况参数设置合理，将由超临界态逐渐转变为气态，并不会出现液态；较低的进口压力、进口温度以及转速，均会容易导致潜在的凝结流动发生；相比于工况参数对相态分布的影响，槽形参数对相态分布的影响较小，近乎可以忽略；开启力除了随进口温度的升高而减小外，均随进口压力、转速、槽深、螺旋角的增大而增大；泄漏率随进口温度和转速的增大而减小，但其随进口压力、槽深、螺旋角的增大而增大。这些结果为进一步研究超临界二氧化碳干气密封提供了一定的支撑。     

Cu/Fe3O4 catalyst for water gas shift reaction: Insight into the effect of Fe2+ and Fe3+ distribution in Fe3O4

Two precursors, namely, p-CFO-T (tetragonal) and p-CFO-C (cubic), were fabricated by a sol-gel method via citric acid and poly(vinyl alcohol) complexation, respectively. After H₂-reduction, the two were converted to Cu/Fe₃O₄ catalysts of different complexions, which are named as CFO-CA and CFO-PVA, respectively. The distribution of Fe²⁺ and Fe³⁺ in the Cu/Fe₃O₄ catalysts was studied by Raman and XPS techniques. It was disclosed that the distribution of Fe²⁺ and Fe³⁺ in Fe₃O₄ has an effect on Cu–Fe₃O₄ interaction and catalyst surface basicity. Compared to CFO-PVA, CFO-CA has a larger amount of Fe³⁺, which mostly sits at the octahedral sites, leading to stronger Cu–Fe₃O₄ interaction, and a larger amount of catalyst surface sites that are of weak basicity. As a result, the critical elementary steps of WGS reaction, viz. water dissociation, –COOH decomposition and CO₂ desorption are promoted as reflected in the lower E_a and higher catalytic activity of CFO-CA.     

PAN纤维共聚单体作用机理的光电离质谱研究

本工作以丙烯腈/衣康酸（IA）二元共聚原丝以及丙烯腈/IA/丙烯酸甲酯（MA）三元共聚原丝为研究对象，利用热重分析仪（TG）和热解-同步辐射真空紫外光电离质谱（Py-SVUV-PIMS）对其热稳定化过程进行研究。TG结果表明，氮气气氛下，二元共聚原丝（PAN/IA）和三元共聚原丝（PAN/IA/MA）分别呈现三阶段和两阶段的热分解过程，其中PAN/IA的第一和第二阶段均对应PAN线型分子链的断裂，但前者是由自由基环化反应放热引发的，后者则是由正常温度下的热分解所致，而单体MA的加入显著抑制了自由基环化反应，使得PAN原丝的热稳定化能够以单体IA诱导的离子型环化反应为主较平缓地进行，相应的热失重过程也由两阶段转变为了单阶段。Py-SVUV-MS的实验结果表明，两种共聚PAN原丝在程序升温过程中会生成包括含氮小分子、丙烯腈单体及低聚物、成环化合物在内的三类主要热解产物，对比各类产物的生成趋势和产量，推断单体MA通过降低PAN结构的规整度，使其无定形化，从而增加环化反应的引发点，促进PAN原丝向稳定的预氧丝转变，同时由典型热解产物——甲基丙烯腈的生成路径可知，MA本身并不参与PAN大分子的环化反应，属于中性共聚单体。空气气氛下，CO₂的产量差异也间接证明了MA单体能够有效提升PAN纤维的固碳能力，采用三元共聚方法制得的PAN纤维热稳定性能更佳。     

Development of mobile miniature natural gas liquefiers

With increasing consumption of natural gas (NG), small NG reservoirs, such as coalbed methane and oil field associated gas, have recently drawn significant attention. Owing to their special characteristics (e.g., scattered distribution and small output), small-scale NG liquefiers are highly required. Similarly, the mixed refrigerant cycle (MRC) is suitable for small-scale liquefaction systems due to its moderate complexity and power consumption. In consideration of the above, this paper reviews the development of mobile miniature NG liquefiers in Technical Institute of Physics and Chemistry (TIPC), China. To effectively liquefy the scattered NG and overcome the drawbacks of existing technologies, three main improvements, i.e., low-pressure MRC process driven by oil-lubricated screw compressor, compact cold box with the new designed heat exchangers, and standardized equipment manufacturing and integrated process technology have been made. The development pattern of “rapid cluster application and flexible liquefaction center” has been eventually proposed. The small-scale NG liquefier developed by TIPC has reached a minimum liquefaction power consumption of about 0.35 kW·h/Nm³. It is suitable to exploit small remote gas reserves which can also be used in boil-off gas reliquefaction and distributed peak-shaving of pipe networks.     

Effects of phenylenediamines and alkoxysilanes on gas transport properties of polyimide - silica hybrid membranes

Gas transport properties of polyimides (PIs) and their silica hybrids were investigated. The PIs synthesized with several methyl-substituted phenylenediamines were hybridized with silica via a sol–gel process with different alkoxysilanes. The prepared hybrid membranes showed controlled gas permselectivity, depending on the selected phenylenediamines and alkoxysilanes. It was worth noting that the hybrids prepared with tetraethoxysilane possessed improved CO₂ permselectivity with increasing silica content, which tended to exceed the upper-bound trade-off line. This fact suggested the additional formation of free volume holes especially favorable for the CO₂/CH₄ separation around the polymer/silica interfacial area.     

Zeolite imidazolate framework (ZIF)-based mixed matrix membranes for CO2 separation: A review

Mixed matrix membranes (MMMs), which combine the good separation performance of inorganic materials with the low cost of polymers, have emerged as a research hotspot for gas separation membranes. Zeolite imidazolate frameworks (ZIFs) are widely used as fillers to prepare MMMs owing to their advantageous characteristics, such as adjustable pore channels, unsaturated sites, and easy functionalization. For MMMs, three directions can be employed as criteria for improvement compared with pristine polymeric membranes. In this article, the progress of ZIF-based MMMs is reviewed from the aspects of sole-ZIF-based MMMs and modified ZIF-based MMMs. Both strategies improve the separation performance through different improvement directions and mechanisms. Our analysis shows that the synergistic effect of the modified filler can change the structure of the membranes, such as by improving the filler–polymer interface voids, which provides a foundation to overcome the trade-off effect to a certain extent. © 2020 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48968.     

Ni、Zn改性Cu/水泥催化剂及其甲醇高温裂解性能

以碱式碳酸镍、碱式碳酸锌、碱式碳酸铜和水泥为原料制备水泥负载的Cu-Ni，Cu-Zn，Cu-Ni-Zn催化剂，考察了合成催化剂的甲醇裂解反应性能。结果表明：在常压、质量空速为3.39 h-1、温度为380~420 ℃的条件下，Cu-Ni/水泥催化剂作用下的甲醇转化率均在96%以上；Cu-Zn/水泥催化剂作用下的甲醇转化率较低，但对H2和CO选择性较高；Cu-Ni-Zn/水泥催化剂经1 600 h运转，甲醇转化率和产物分布变化不大，甲醇转化率基本维持在81%以上，(H2+CO)摩尔分数大于98%，说明Cu-Ni-Zn/水泥催化剂具有良好的高温稳定性。     

固相萃取-气相色谱-串联质谱法测定紫菜中扑草净的残留量

目的建立固相萃取-气相色谱-串联质谱法测定紫菜中扑草净的残留量。方法样品用乙腈提取,经活性炭/氨基复合柱(Envi-Carb/NH_2)净化,经Rxi-5MS石英毛细管色谱柱分离,采用电子轰击源质谱检测,选择离子监测(selective ion monitoring,SIM)模式检测,外标法定量。结果扑草净在2~1000μg/L范围内具有良好的线性关系,相关系数r~2=0.9998。扑草净在5、10、20、50μg/kg 4种条件下,样品加标回收率在95.1%~107.9%,RSD在5.36%~7.77%(n=6),方法检出限为1μg/kg,定量限为4μg/kg。结论该方法操作简单,准确度与精密度较好,能快速简便地检测紫菜中扑草净的残留量。